On orders over $50
8.0" x 20" CENTER HOLE RIBBED INFLATABLE BOAT FENDERS - SET OF FOUR (4)
DIMENSIONS: 8.0" x 20"
FENDER SIZING GUIDE
Recommended size for fenders by Boat Length:
Boats up to 10 ft: 4.5" x 16" Twin/Single Eye
Boats from 10-30 ft: 6.5" x 23" Twin Eye
Boats from 15-40 ft: 8.5" x 27" Twin Eye
Boats from 20-30 ft: 6.0" x 15" Center Hole
Boats from 30-40 ft: 8.0" x 20" Center Hole
Boats from 40-50 ft: 10" x 28" Center Hole
Consider using a larger size fender if mooring in high winds, rough water, or unprotected moorings. Many factors should be considered when determining what size fender to use. If in doubt, seek professional advice.
FENDER INFLATION GUIDE
Fill fender until sidewalls are firm, but not bulging. Fender should still compress 1/2" under light pressure. When inflating with an air compressor, set the PSI to 2 lbs. Moisten inflation needle prior to inserting into the fender. Pressure at 20 degrees C.
Important! Do not over-inflate as this will weaken the product and reduce its lifetime
⚠ WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov