10" x 28" CENTER HOLE RIBBED INFLATABLE BOAT FENDERS - SET OF FOUR (4)
FEATURES INCLUDE:
Vertical ribs for extra protection
Reinforced tube ends to prevent lines from being pulled through if the fender gets caught in a tight spot
Fenders are shipped deflated to save shipping costs
Can be hung Vertical or Horizontal
Super-soft fenders are non-abrasive
Quantity: Set of 4 Inflatable Boat Fenders
Style: Center Hole Ribbed
Size: 10" x 28"
Color: White
DIMENSIONS: 10" x 28"
FENDER SIZING GUIDE Recommended size for fenders by Boat Length:
Boats up to 10 ft: 4.5" x 16" Twin/Single Eye Boats from 10-30 ft: 6.5" x 23" Twin Eye Boats from 15-40 ft: 8.5" x 27" Twin Eye
Boats from 20-30 ft: 6.0" x 15" Center Hole Boats from 30-40 ft: 8.0" x 20" Center Hole Boats from 40-50 ft: 10" x 28" Center Hole
Consider using a larger size fender if mooring in high winds, rough water, or unprotected moorings. Many factors should be considered when determining what size fender to use. If in doubt, seek professional advice.
FENDER INFLATION GUIDE Fill fender until sidewalls are firm, but not bulging. Fender should still compress 1/2" under light pressure. When inflating with an air compressor, set the PSI to 2 lbs. Moisten inflation needle prior to inserting into the fender. Pressure at 20 degrees C.
Important! Do not over-inflate as this will weaken the product and reduce its lifetime
California Customers: ⚠ WARNING:
This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov
